We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637892
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 63 mm |
| Piston rod thread | M10 |
| Standardization | ISO 15524 |
| Stroke | 100 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Polyurethane |
| Compressed air connection | G 1/4 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Aventics (brand of Emerson) R480637892, connect FAMAGA, the world's principle retailer of streamlined equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each customer. We understand everyone, who engaged with us - thus, our regular buyers receive the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Djibouti, Iceland, Norway, Kiribati, Croatia, Antigua and Barbuda, Andorra, Chad, Bulgaria, Kazakhstan, Swaziland, United States, Sudan, Armenia, Niger, Ghana, Denmark, Azerbaijan, Jordan, Samoa, Macedonia, Austria, Haiti, Iran, Philippines, Tonga, New Zealand, Equatorial Guinea, Greece, Estonia, Rwanda, Bolivia, Kenya, Chile, Tanzania, Qatar, Mongolia, Australia. A well-built logistics chains and a partnership network guide us to dispatch our items anywhere in the earth on-time without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To consult or book, contact us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note the selection of fittings for strokes < 10 mm . |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
