We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010744
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 32 mm |
Stroke | 25 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822010744, get in touch with FAMAGA, the world's key retailer of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of spare parts and particular attention to each customer. We cherish everyone, who cooperated with us - therefore, our regular consumers obtain the most flexible purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Serbia, Greece, Spain, India, Cambodia, Mongolia, United Arab Emirates, Portugal, Tonga, Kenya, Australia, Turkey, Sweden, Belarus, Burma, Bhutan, Bosnia and Herzegovina, Zambia, Rwanda, Thailand, Ukraine, Antigua and Barbuda, North Korea, Ireland, Iceland, Senegal, Uganda, Panama, Liechtenstein, Norway, Sudan, South Sudan, Brazil, Finland, Austria, Estonia, Armenia, Czech Republic, Kiribati, Switzerland, Mali, Bangladesh. A well-elaborated logistics network and a partnership network guide us to ship our products anywhere in the earth promptly without discrediting product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, contact us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |