We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480044478
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 40 mm |
| Piston rod thread | M12x1,25 |
| Standardization | ISO 15552 |
| Stroke | 160 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/4 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R480044478, make contact with FAMAGA, the world's main supplier of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each user. We esteem everyone, who cooperated with us - thus, our regular customers accept the most flexible purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such customers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Argentina, Indonesia, Bangladesh, Morocco, Portugal, Dominica, Uruguay, Iraq, Finland, Nigeria, Netherlands, Armenia, Hungary, Kenya, Yemen, Mali, Vietnam, Austria, Mexico, Mongolia, Serbia, Chile, Greece, Sweden, Senegal, Croatia, Ecuador, Laos, Eswatini, Benin, Andorra, Kiribati, Australia, Jordan, Montenegro, Cameroon, Bulgaria, Ghana, Algeria, Moldova. A advanced logistics series and a partnership network assist us to deliver our goods anywhere in the globe on-time without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been delivered, and this bulk is growing every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To request or book, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
