We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821303544
Description
Parts | Filter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 5 µm |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 4000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821303544, make contact with FAMAGA, the world's influential distributor of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of spare parts and personalseparate attention to each purchaser. We cherish everyone, who worked with us - so, our regular consumers get the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such clients, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Ghana, Congo, Burma, Zimbabwe, Belgium, France, Gambia, Lebanon, Colombia, Chad, Seychelles, Hungary, Croatia, Chile, Iran, Argentina, Guinea, Austria, Botswana, Sudan, East Timor, Rwanda, South Korea, Thailand, Paraguay, Belize, Bosnia and Herzegovina, Serbia, Kyrgyzstan, Greece, Latvia, Zambia, Niger, Jordan, Kiribati, Iraq, Nigeria, Sierra Leone, Algeria, Kenya, Montenegro. A well-elaborated logistics bond and a partnership network cheer us to dispatch our items anywhere in the globe as soon as possible without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or book, contact us or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Standard filter, Can be assembled into blocks |
Parts | Filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 50 cm³ |
Filter element | exchangeable |
filter porosity | 5 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. Suitable for use in Ex zones 1, 2, 21, 22. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Cellpor |