We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821303504
Description
Parts | Filter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 5 µm |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 4000 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0821303504, connect FAMAGA, the world's dominant supplier of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and individual attention to each client. We admire everyone, who liased with us - thus, our regular consumers get the most beneficial purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Madagascar, Cuba, Canada, Sierra Leone, Colombia, South Africa, Bahamas, Honduras, Lebanon, Japan, Libya, Burkina Faso, North Korea, Belarus, Nepal, United States, Burma, Oman, Afghanistan, Namibia, Mauritius, Sudan, Poland, Rwanda, Kuwait, Mexico, El Salvador, The Bahamas, Mongolia, Mozambique, Pakistan, Ghana, Finland, Egypt, The Gambia, China, Zimbabwe, Luxembourg, Tajikistan, Haiti, Bolivia, Indonesia. A well-elaborated logistics link and a partnership network guide us to conduct our elements anywhere in the earth with no delay without discrediting product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as stay in control.
To get some advice or place an order, phone us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Standard filter, Can be assembled into blocks |
Parts | Filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 50 cm³ |
Filter element | exchangeable |
filter porosity | 5 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. Suitable for use in Ex zones 1, 2, 21, 22. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Cellpor |