We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480069508
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480069508, contact FAMAGA, the world's main supplier of streamlined equipment. Our company has operated for more than ten years - these are years of experience, which are illustrated in the quality of products and particular attention to each purchaser. We value everyone, who conspired with us - therefore, our regular clients receive the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Malaysia, Bolivia, East Timor, Andorra, Ireland, Japan, Zambia, Egypt, India, Cuba, Angola, South Sudan, New Zealand, El Salvador, Jamaica, Slovenia, Macedonia, Peru, Antigua and Barbuda, Czech Republic, Afghanistan, Pakistan, Madagascar, Indonesia, Argentina, Panama, Guatemala, Luxembourg, Senegal, Burundi, Nicaragua, Samoa, Estonia, Sweden, Burkina Faso, Montenegro, Djibouti, Belarus, Togo, Cape Verde, Austria, Albania, Comoros, Switzerland. A advanced logistics series and a partnership network guide us to conduct our items anywhere in the world on-time without compromising product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To request or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |