We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637891
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | ISO 15524 |
Stroke | 80 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480637891, catch up with FAMAGA, the world's dominant provider of industrial equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of products and particular attention to each buyer. We esteem everyone, who worked with us - therefore, our regular purchasers procure the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Mozambique, Indonesia, Libya, Tajikistan, Albania, Uganda, Cuba, Thailand, Egypt, United States, Guatemala, Burkina Faso, Bolivia, Senegal, Sweden, Chile, Singapore, Monaco, Azerbaijan, Nicaragua, Mauritius, Tunisia, Iraq, Mexico, Chad, Morocco, Qatar, Niger, Botswana, East Timor, Nepal, Cyprus, Russia, Armenia, Angola, Yemen, The Gambia, Brunei, Kuwait, Dominica, United Arab Emirates, Madagascar. A advanced logistics series and a partnership network allow us to conduct our goods anywhere in the planet as soon as possible without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |