We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680377
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 400 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480680377, catch up with FAMAGA, the world's top distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and private attention to each buyer. We esteem everyone, who conspired with us - thus, our regular customers obtain the most flexible purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Central African Republic, Sierra Leone, South Africa, Syria, Sri Lanka, Chad, Colombia, Czech Republic, Turkmenistan, Myanmar, Turkey, Montenegro, Senegal, Australia, Moldova, Belgium, Kuwait, Guinea, Switzerland, Tanzania, Estonia, Saudi Arabia, Tunisia, Sudan, Malaysia, Liechtenstein, Zambia, Yemen, Kazakhstan, Jamaica, Lithuania, Ukraine, Belarus, Kiribati, Ecuador, India, Bosnia and Herzegovina, Antigua and Barbuda, Andorra, Cyprus, Mali, Iraq. A well-built logistics chains and a partnership network assist us to dispatch our items anywhere in the world on-time without damaging product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this amount is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as to stay on the top.
To ask a question or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |