We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422103841
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber,Polyurethane |
Protection class | IP50 |
Number of wires | 2-pin |
Port size | Industrial plug connector |
Type | Plug |
Nominal flow Qn | 270 l/min |
Compressed air connection input | Ø 6 |
Compressed air connection output | Ø 6 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422103841, call FAMAGA, the world's major producer of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of merchandises and private attention to each consumer. We value everyone, who liased with us - therefore, our regular purchasers obtain the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Mauritius, San Marino, Dominican Republic, Algeria, France, Guyana, Bhutan, Afghanistan, Russia, Honduras, Morocco, Swaziland, Nepal, Dominica, Mauritania, Oman, Uruguay, Eritrea, Kiribati, Togo, Malawi, Laos, The Bahamas, Malaysia, Zimbabwe, Eswatini, El Salvador, Botswana, Australia, Brunei, Tonga, Benin, Cape Verde, Kyrgyzstan, Luxembourg, The Gambia, Belize, Serbia, Antigua and Barbuda, Croatia, Vietnam, Norway, Ireland, Tunisia. A well-built logistics link and a partnership network let us to ship our products anywhere in the world promptly without damaging product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 3 ... 7 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP50 |
Protective circuit | Z-diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 10 ms |
Generic emission standard in accordance with | EN 61000-6-4:2002 |
Generic immunity standard in accordance with | IEC 61000-6-2:2005 |
mounting screws | M3 |
Mounting screw tightening torque | 0,5 Nm |
Weight | 0,063 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). A duty cycle of 100 percent is only valid for single valves. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber Polyurethane |