We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422103591
Description
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber,Polyurethane |
Protection class | IP50 |
Number of wires | 2-pin |
Port size | Industrial plug connector |
Type | Plug |
Nominal flow Qn | 175 l/min |
Compressed air connection input | Ø 4 |
Compressed air connection output | Ø 4 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422103591, catch up with FAMAGA, the world's principle producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of products and particular attention to each customer. We esteem everyone, who engaged with us - so, our regular clients bring in the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Costa Rica, Guinea-Bissau, Cuba, Iraq, Myanmar, Nicaragua, Grenada, Latvia, El Salvador, Canada, Suriname, Kuwait, Morocco, Syria, Belarus, Singapore, Central African Republic, Netherlands, India, Djibouti, Saudi Arabia, Zambia, Guyana, Qatar, Tajikistan, Tanzania, Angola, Benin, New Zealand, Yemen, Andorra, United States, Estonia, Czech Republic, Serbia, Georgia, Burundi, Peru, Tunisia, Malaysia, Switzerland, Kenya, Guatemala, Cameroon. A well-shaped logistics chains and a partnership network guide us to conduct our elements anywhere in the planet with no delay without undermining product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are proud that users choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as to stay on the top.
To request or book, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 3 ... 7 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP50 |
Protective circuit | Z-diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 15 ms |
Generic emission standard in accordance with | EN 61000-6-4:2002 |
Generic immunity standard in accordance with | IEC 61000-6-2:2005 |
mounting screws | M3 |
Mounting screw tightening torque | 0,5 Nm |
Weight | 0,064 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). A duty cycle of 100 percent is only valid for single valves. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber Polyurethane |