We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422103583
Description
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber,Polyurethane |
Protection class | IP50 |
Number of wires | 2-pin |
Port size | Industrial plug connector |
Type | Plug |
Nominal flow Qn | 180 l/min |
Compressed air connection input | Ø 4 |
Compressed air connection output | Ø 4 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422103583, call FAMAGA, the world's foremost vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of spare parts and private attention to each orderer. We value everyone, who engaged with us - hence, our regular purchasers pick up the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Iraq, Lesotho, Myanmar, Tajikistan, Slovenia, Azerbaijan, Eritrea, Montenegro, Jordan, Bhutan, Central African Republic, Australia, Uruguay, Sudan, Israel, Malawi, Syria, Liberia, Estonia, India, Singapore, Japan, Samoa, Liechtenstein, Denmark, Chad, Switzerland, Antigua and Barbuda, Moldova, Sweden, Thailand, Panama, Brazil, Iceland, Comoros, Laos, Cameroon, The Gambia, Zambia, Philippines, Andorra, Ukraine, Togo, Slovakia, Croatia. A well-built logistics bond and a partnership network guide us to ship our goods anywhere in the globe with no delay without damaging product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as keep on top of it.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 3 ... 7 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP50 |
Protective circuit | Z-diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 15 ms |
Generic emission standard in accordance with | EN 61000-6-4:2002 |
Generic immunity standard in accordance with | IEC 61000-6-2:2005 |
mounting screws | M3 |
Mounting screw tightening torque | 0,5 Nm |
Weight | 0,064 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). A duty cycle of 100 percent is only valid for single valves. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber Polyurethane |