We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000392
Description
Adjustable angle of rotation max. | 180 ° |
Adjustable angle of rotation min. | 0 ° |
Frame size | RCM-20 |
Version | double piston with rack |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | M5 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412000392, get in touch with FAMAGA, the world's main distributor of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each purchaser. We admire everyone, who joined with us - so, our regular purchasers procure the most favorable purchase conditions and discounts on the factory-made equipment market. Now, there are more than 3500 such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Myanmar, Cambodia, Dominican Republic, Monaco, Canada, Uzbekistan, Cyprus, Jordan, East Timor, Switzerland, Russia, Belgium, Bahamas, Colombia, Grenada, Yemen, Angola, Romania, Jamaica, Brazil, United States, Belize, Tunisia, Rwanda, Qatar, Serbia, Georgia, Lithuania, Bolivia, Mexico, Nicaragua, Zimbabwe, Mongolia, Afghanistan, Egypt, New Zealand, Belarus, Djibouti, Kenya, Burkina Faso, Kiribati, Luxembourg, Pakistan, Mali, Madagascar, India. A well-built logistics connection and a partnership network cheer us to ship our goods anywhere in the world as soon as possible without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or book, phone us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 5 ... 60 °C |
Medium temperature min./max. | 5 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
air duct | with air duct |
Cushioning | hydraulic non-adjustable |
Theoretical torque at | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Cap | Aluminum, black anodized |
Base | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |
Axis | Steel, hardened |
Rotary flange | Steel, hardened |