We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
3354418740
Description
Standardization | ISO 15407-1 |
Type | MS01-PA test block, variant I, with 2 x 3/2-directional valve |
Version | 2x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Polyamide fiber-glass reinforced |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 1/4 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 3354418740, connect FAMAGA, the world's top producer of factory-made equipment. Our company has advanced for more than ten years - these are ages of experience, which are outlined in the quality of outputs and personalseparate attention to each customer. We cherish everyone, who worked with us - so, our regular buyers bring in the most beneficial purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4500 such customers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Iran, Montenegro, Yemen, Tajikistan, Sri Lanka, Japan, Honduras, Grenada, Lebanon, New Zealand, Kuwait, Laos, Sudan, South Korea, Saudi Arabia, Mauritius, Nicaragua, Albania, Monaco, Panama, South Sudan, Ireland, Egypt, Jamaica, India, El Salvador, Vietnam, Libya, Turkmenistan, Zimbabwe, China, Ghana, Dominica, Poland, Turkey, Luxembourg, Cape Verde, Comoros, Peru, Australia, Mauritania, Belarus, Suriname, Pakistan. A well-developed logistics link and a partnership network help us to deliver our products anywhere in the world on-time without disreputing product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, phone us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Grid dimension | 27 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Polyamide fiber-glass reinforced |