We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680376
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 320 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480680376, connect FAMAGA, the world's top distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and personalseparate attention to each client. We esteem everyone, who conspired with us - thus, our regular purchasers obtain the most flexible purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Monaco, Jordan, Eritrea, Cambodia, Bolivia, Namibia, Kyrgyzstan, Grenada, United Arab Emirates, Colombia, Luxembourg, Burundi, Hungary, Equatorial Guinea, Oman, Kazakhstan, Algeria, Yemen, North Korea, Fiji, New Zealand, Tunisia, Uzbekistan, Albania, Armenia, Iran, Senegal, Denmark, Malta, Mauritania, Bulgaria, Mexico, Ukraine, Kenya, Rwanda, Nigeria, Lithuania, Nepal, Chile, Israel, Uganda, Moldova. A well-developed logistics system and a partnership network assist us to deliver our items anywhere in the world on-time without discrediting product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |