We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472406567
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 400 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472406567, reach FAMAGA, the world's prime vendor of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are portrayed in the quality of products and private attention to each customer. We respect everyone, who joined with us - thus, our regular clients receive the most acceptable purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 3500 such customers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Greece, South Korea, Mali, Fiji, Suriname, Swaziland, Sri Lanka, Netherlands, Burundi, Morocco, The Bahamas, Uruguay, Nicaragua, Slovakia, Namibia, Canada, Sweden, Tonga, Haiti, Philippines, Egypt, Kyrgyzstan, Switzerland, Djibouti, Austria, Liechtenstein, United States, Guyana, Tajikistan, Lithuania, Estonia, Ireland, Montenegro, Serbia, Albania, Kuwait, Burkina Faso, Latvia, Panama, Costa Rica, Antigua and Barbuda, Samoa, Tunisia. A well-built logistics link and a partnership network let us to deliver our units anywhere in the world on-time without disreputing product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To ask a question or order, contact us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |