We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822495203
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822495203, reach FAMAGA, the world's leading vendor of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each client. We esteem everyone, who cooperated with us - therefore, our regular clients receive the most favorable purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Slovakia, Latvia, Chile, Haiti, Syria, Colombia, South Sudan, Tonga, Costa Rica, Iraq, Georgia, Libya, Hungary, Monaco, Zimbabwe, Ukraine, Chad, Vietnam, Seychelles, Montenegro, Luxembourg, Albania, Thailand, Tunisia, South Korea, The Gambia, Angola, Niger, Pakistan, Poland, New Zealand, Benin, Ireland, East Timor, Afghanistan, Nepal, China, Jamaica, Denmark, Egypt, Eswatini. A well-built logistics system and a partnership network let us to conduct our goods anywhere in the world with no delay without undermining product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or make a request, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |