We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020705
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412020705, reach FAMAGA, the world's central producer of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each client. We appreciate everyone, who worked with us - hence, our regular clients obtain the most desirable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Sweden, Spain, Dominica, San Marino, Romania, Armenia, Benin, Liechtenstein, Belize, Zambia, Zimbabwe, Syria, Cameroon, Burkina Faso, Vietnam, Slovakia, Iraq, Paraguay, Ghana, Ecuador, Liberia, Finland, Sudan, Laos, Mongolia, Suriname, Senegal, Philippines, Equatorial Guinea, Tonga, Thailand, Australia, Kenya, El Salvador, Andorra, Kyrgyzstan, Lithuania, Ireland, Uruguay, Guatemala. A well-built logistics bond and a partnership network help us to conduct our units anywhere in the globe immediately without disreputing product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |