We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001547
Description
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001547, reach FAMAGA, the world's foremost supplier of machine made equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each consumer. We appreciate everyone, who cooperated with us - so, our regular clients accept the most favorable purchase terms and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Portugal, Eritrea, Myanmar, Panama, Slovenia, Czech Republic, Switzerland, Dominican Republic, Suriname, Montenegro, Brunei, Mauritius, Canada, Kuwait, Tonga, Cameroon, Mexico, Australia, Mauritania, Grenada, Japan, Romania, Cape Verde, Lithuania, Angola, Croatia, Slovakia, Botswana, Costa Rica, Finland, Iraq, Haiti, Zambia, Madagascar, Egypt, Turkey, Samoa, Benin, Syria, Afghanistan, Morocco, Estonia, Malaysia, Kenya, Poland, Kiribati. A well-developed logistics bond and a partnership network allow us to dispatch our elements anywhere in the globe on-time without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To ask a question or order, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |