We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472402181
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472402181, catch up with FAMAGA, the world's foremost company of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are portrayed in the quality of products and individual attention to each orderer. We understand everyone, who engaged with us - thus, our regular buyers receive the most acceptable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Brazil, Latvia, Hungary, Nepal, Papua New Guinea, Bangladesh, Yemen, Bahamas, Zimbabwe, Netherlands, Tonga, Romania, Liberia, Bosnia and Herzegovina, Morocco, Switzerland, Kuwait, Dominica, Malaysia, Liechtenstein, Eswatini, Mauritania, Nigeria, India, Botswana, Ecuador, Fiji, Serbia, Philippines, Norway, Afghanistan, Moldova, Poland, Jordan, Indonesia, Ghana, Mauritius, Lithuania. A advanced logistics network and a partnership network let us to ship our units anywhere in the world promptly without undermining product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To consult or order, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |