We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480176766
Description
| Functional principle | double-acting |
| Cushioning | pneumatically,pneumatically |
| adjustable | |
| Magnetic piston | with magnetic piston |
| Piston diameter | 32 mm |
| Piston rod thread | 7/16-20 UNF |
| Stroke | 25.4 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | 1/8 NPT |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Aventics (brand of Emerson) R480176766, get in touch with FAMAGA, the world's foremost supplier of mechanized equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of products and private attention to each buyer. We respect everyone, who engaged with us - hence, our regular buyers receive the most beneficial purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Czech Republic, Morocco, Kazakhstan, Costa Rica, Italy, Eritrea, Dominican Republic, Syria, Romania, Oman, Russia, Macedonia, Fiji, Burundi, Guyana, Haiti, Serbia, Liberia, Mauritius, Chad, Togo, Cameroon, Armenia, Mexico, Namibia, Greece, Burkina Faso, North Korea, United States, Switzerland, Iceland, Nepal, Kyrgyzstan, Indonesia, Denmark, Sweden, New Zealand, Philippines, Slovakia. A well-shaped logistics series and a partnership network guide us to ship our units anywhere in the globe quickly without discrediting product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Compressed air connection | Internal thread |
| Working pressure min./max. | 2 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
