We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
2621701070
Description
Standardization | ISO 5599-2 |
Cable exit | straight |
Number of valve positions | 1 |
Frame size | ISO 1 |
Housing | Die-cast aluminum |
Sealing material | Aluminum |
Subbase | Die-cast aluminum |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1500 l/min |
Compressed air connection input | 3/8 NPT |
Compressed air connection output | 3/8 NPT |
Operational voltage AC at 60 Hz | 110 V |
DC operating voltage | 24 V |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 2621701070, catch up with FAMAGA, the world's chief distributor of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and special attention to each user. We cherish everyone, who engaged with us - therefore, our regular consumers accept the most helpful purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Guinea, Belize, Chad, El Salvador, France, Namibia, Kiribati, Palestine, Cyprus, Tanzania, Eritrea, Mali, Canada, Antigua and Barbuda, Monaco, Rwanda, Sweden, Philippines, India, Hungary, Mozambique, Slovakia, Laos, Algeria, Ireland, Albania, United States, Uruguay, Afghanistan, East Timor, Azerbaijan, Macedonia, Liechtenstein, North Korea, Madagascar, The Gambia, Australia, Costa Rica, Lithuania, Norway, Iceland, Yemen, Moldova, Argentina, Kazakhstan, Eswatini. A well-elaborated logistics network and a partnership network assist us to send our elements anywhere in the earth on-time without discrediting product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are happy that users choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Single plug-in wiring |
Standards | ISO 5599-2 |
Compressed air connection | according to ISO 5599 |
Nominal flow Qn | 1500 l/min |
Working pressure min./max. | -0,95 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -14 ... 50 °C |
Medium | Compressed air |
Number of valve positions max. | 1 |
Direction of pneumatic port (1) | On the side |
Direction of pneumatic port (2,4) | On the side |
Direction of pneumatic port (12) | On the side |
Direction of pneumatic port (14) | On the side |
Exhaust (3,5) | uncollected exhaust |
Exhaust type | Ports separated |
Tightening torque for mounting screws | 3 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Die-cast aluminum, painted gray |
Surface | anodized |
Base plate | Die-cast aluminum |
Seal | Aluminum, anodized |