We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637830
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 12 mm |
Piston rod thread | M3 |
Standardization | ISO 15524 |
Stroke | 5 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480637830, call FAMAGA, the world's key provider of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each user. We praise everyone, who collaborated with us - so, our regular consumers obtain the most flexible purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Liberia, Malta, Azerbaijan, Croatia, Guinea, Chile, Laos, Togo, India, Nicaragua, Slovakia, Japan, Andorra, Russia, Kazakhstan, Haiti, United Arab Emirates, Zambia, Paraguay, Madagascar, Czech Republic, Argentina, Grenada, Chad, South Korea, United States, Burkina Faso, Algeria, Swaziland, Gambia, Tunisia, Mongolia, Antigua and Barbuda, Norway, Nepal, Qatar, Sudan, Burundi, Brazil, Armenia, Mali, Sweden, Israel, Hungary, Thailand, Kiribati. A advanced logistics series and a partnership network guide us to ship our goods anywhere in the world on-time without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To inquire or order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |