We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011205
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 7x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | 3/8 NPT |
Compressed air connection output | 1/4 NPT |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412011205, communicate with FAMAGA, the world's foremost retailer of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each consumer. We understand everyone, who liased with us - hence, our regular buyers bring in the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such customers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Jordan, Thailand, Paraguay, Kuwait, Lesotho, Moldova, Dominican Republic, Chad, Bahamas, Costa Rica, Sierra Leone, Seychelles, Gambia, Malta, Liberia, Burkina Faso, New Zealand, Afghanistan, Zambia, Kenya, Dominica, Malawi, Tanzania, Malaysia, North Korea, Nigeria, Burundi, Iceland, Mongolia, Rwanda, Senegal, Azerbaijan, Bulgaria, Bangladesh, Namibia, Mali, Morocco, Israel, Ghana, Eswatini, Bosnia and Herzegovina, Tonga, Hungary, India, China, Niger, Iraq. A well-built logistics bond and a partnership network allow us to deliver our goods anywhere in the world immediately without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or make a request, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |