We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011202
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 4x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | 3/8 NPT |
Compressed air connection output | 1/4 NPT |
DC operating voltage | 24 V |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412011202, contact FAMAGA, the world's key provider of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each consumer. We appreciate everyone, who collaborated with us - hence, our regular consumers get the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Antigua and Barbuda, Iran, Austria, Nepal, Portugal, Brazil, Cuba, Liberia, Papua New Guinea, Haiti, Bosnia and Herzegovina, Comoros, Uzbekistan, North Korea, Gambia, South Korea, Uruguay, Latvia, Lithuania, Ukraine, Syria, Saudi Arabia, Norway, Bhutan, Qatar, Tonga, Iceland, Jordan, Mongolia, Laos, Kyrgyzstan, Turkey, Ecuador, Senegal, Sudan, Argentina, Namibia, Suriname, Rwanda, Montenegro, Tanzania, El Salvador, Andorra, Israel, Armenia, Cape Verde, Slovakia, Sierra Leone. A well-shaped logistics bond and a partnership network let us to send our products anywhere in the world with no delay without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is rising every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |