We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011189
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant I, with 2 x 3/2-directional valve |
Version | 7x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | 3/8 NPT |
Compressed air connection output | 1/4 NPT |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412011189, reach FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are portrayed in the quality of goods and personalseparate attention to each purchaser. We admire everyone, who joined with us - hence, our regular clients procure the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly sign new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Malta, Uruguay, Montenegro, Sweden, South Africa, Chile, Slovenia, Honduras, Portugal, Myanmar, Latvia, Azerbaijan, Denmark, Liechtenstein, Seychelles, Bangladesh, Brunei, Namibia, India, Costa Rica, Gambia, Macedonia, Saudi Arabia, United Arab Emirates, Eswatini, Zambia, Cameroon, Lithuania, Greece, Paraguay, Turkmenistan, Australia, Jordan, Iran, Iraq, Niger, Brazil, Syria, Libya, Turkey, Ukraine, Georgia, Tanzania, Czech Republic, Mongolia, Serbia, Israel, Jamaica. A advanced logistics network and a partnership network let us to send our elements anywhere in the globe with no delay without undermining product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To consult or make a request, contact us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |