We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011188
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant I, with 2 x 3/2-directional valve |
Version | 6x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | 3/8 NPT |
Compressed air connection output | 1/4 NPT |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412011188, contact FAMAGA, the world's the best provider of manufacturing equipment. Our company has worked for more than ten years - these are years of experience, which are symbolized in the quality of merchandises and particular attention to each buyer. We appreciate everyone, who collaborated with us - so, our regular consumers get the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Croatia, Sweden, Indonesia, Central African Republic, Guinea-Bissau, Belarus, Belgium, Burma, Dominican Republic, Papua New Guinea, Ghana, South Sudan, Panama, Fiji, Libya, East Timor, Senegal, Benin, Cape Verde, Algeria, The Bahamas, Djibouti, Netherlands, Tanzania, United Arab Emirates, Finland, Philippines, Samoa, Pakistan, Mexico, Nicaragua, Morocco, The Gambia, Nepal, Zimbabwe, Egypt, Guatemala, Bangladesh, Comoros, Swaziland, Togo, Tunisia, Vietnam, Seychelles, Peru, Mongolia, South Korea, Cameroon. A well-built logistics series and a partnership network allow us to conduct our goods anywhere in the world immediately without disreputing product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of industrial equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as to stay on the top.
To request or order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |