We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412014229
Description
| Functional principle | double-acting |
| Cushioning | pneumatically |
| adjustable | |
| Magnetic piston | with magnetic piston |
| Piston diameter | 32 mm |
| Piston rod thread | M10x1,25 |
| Standardization | ISO 15552 |
| Stroke | 25 mm |
| Sealing material | Fluorocaoutchouc |
| Scraper | Fluorocaoutchouc |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
| Temperature resistance | Heat resistant |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Aventics (brand of Emerson) R412014229, reach FAMAGA, the world's key producer of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of goods and individual attention to each buyer. We admire everyone, who worked with us - therefore, our regular buyers get the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Montenegro, Algeria, Spain, Guinea, Nicaragua, El Salvador, Congo, India, Brazil, Armenia, Myanmar, Rwanda, Thailand, Lithuania, Brunei, Kyrgyzstan, Russia, Tunisia, Iran, Chad, Turkmenistan, Uganda, Angola, Namibia, Ghana, Egypt, New Zealand, Belarus, Estonia, Nigeria, Bulgaria, Niger, Mexico, Belize, Mozambique, Laos, Zambia, Libya, Denmark. A well-shaped logistics series and a partnership network let us to deliver our elements anywhere in the world promptly without discrediting product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is increasing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as keep on top of it.
To inquire or make a request, contact us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 2 ... 10 bar |
| Ambient temperature min./max. | -10 ... 120 °C |
| Medium temperature min./max. | -10 ... 120 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Fluorocaoutchouc Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Fluorocaoutchouc |
