We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R414009644
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.003 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R414009644, connect FAMAGA, the world's influential retailer of manufacturing equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and special attention to each purchaser. We understand everyone, who liased with us - so, our regular consumers receive the most convenient purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Lebanon, El Salvador, Pakistan, Nicaragua, Chile, Poland, Afghanistan, Albania, Cuba, Uzbekistan, Colombia, Mexico, Namibia, Luxembourg, Burma, Grenada, Brazil, Finland, Monaco, Paraguay, Netherlands, New Zealand, Angola, Peru, Mozambique, Latvia, East Timor, Guatemala, Mauritania, Sierra Leone, Haiti, United States, Iceland, Egypt, Burundi, Swaziland, Australia, Qatar, Libya. A well-elaborated logistics connection and a partnership network guide us to conduct our elements anywhere in the world with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of manufacturing equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, phone us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |