We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R414003364
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Port size | via signal connection |
Nominal flow Qn | 120 l/min |
Hysteresis | < 0.01 bar |
Compressed air connection input | G 1/8,1/8 NPT |
Compressed air connection output | G 1/8,1/8 NPT |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R414003364, connect FAMAGA, the world's the best retailer of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each orderer. We praise everyone, who liased with us - hence, our regular customers procure the most convenient purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Liberia, Qatar, Guinea-Bissau, Belarus, Austria, Indonesia, Nepal, Guatemala, Singapore, Antigua and Barbuda, Kuwait, Israel, Benin, Gambia, Liechtenstein, Czech Republic, Egypt, Guyana, Angola, Thailand, Japan, Russia, Iraq, Cyprus, Ireland, Brunei, El Salvador, Morocco, South Sudan, Seychelles, Mexico, Jamaica, Tunisia, Poland, Argentina, Comoros, Andorra, East Timor, Algeria, Djibouti, Turkey. A advanced logistics network and a partnership network guide us to conduct our products anywhere in the world immediately without compromising product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | ±α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Compressed air connection input | G 1/8 1/8 NPT |
Compressed air connection output | G 1/8, 1/8 NPT |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 120 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +20% |
Permissible ripple | 5% |
Max. power consumption | 300 mA |
Protection class | IP65 |
Weight | 0,32 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. ED02 series valves can be assembled into blocks using tie rods (see accessories). The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. The compressed air connection threads fit both G 1/8 and 1/8 NPTF. |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |