We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822497301
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M16x1,5 |
Standardization | NFE 49004 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822497301, catch up with FAMAGA, the world's dominant company of manufacturing equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each consumer. We admire everyone, who collaborated with us - therefore, our regular consumers get the most convenient purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such clients, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Niger, Yemen, Canada, Palestine, Panama, Croatia, Bhutan, Austria, Turkmenistan, Andorra, Nicaragua, Romania, Slovakia, Israel, Guyana, The Gambia, Tunisia, Fiji, Comoros, Mozambique, Benin, Swaziland, Malaysia, Burundi, India, Seychelles, Zambia, Norway, Togo, Latvia, Guatemala, Kazakhstan, Switzerland, Philippines, China, Turkey, Belarus, Poland, Syria, Botswana. A well-built logistics chains and a partnership network allow us to dispatch our items anywhere in the world quickly without damaging product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To request or order, get in touch with us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |