We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5811563160
Description
Standardization | ISO 5599-1 |
Cable length | 0.5 m |
Frame size | ISO 1 |
Switching principle | 5/3 |
Version | Spool valve |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP67 |
Number of wires | 3-pin |
Type | Plug |
Nominal flow Qn | 1100 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5811563160, make contact with FAMAGA, the world's central producer of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of products and special attention to each customer. We value everyone, who worked with us - thus, our regular buyers receive the most attractive purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such clients, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Guinea-Bissau, Kenya, Greece, Zimbabwe, Egypt, Honduras, Uzbekistan, Angola, Belgium, Libya, Turkmenistan, Djibouti, Costa Rica, The Bahamas, Czech Republic, Jamaica, Netherlands, Macedonia, Panama, Syria, Guatemala, Mauritania, Mauritius, Croatia, Burundi, Ireland, Lithuania, Suriname, Ghana, Russia, New Zealand, Kazakhstan, Brunei, Eswatini, El Salvador, Switzerland, Swaziland, Mexico, Dominica, Finland, Vietnam, Kiribati, South Korea, Denmark. A well-elaborated logistics link and a partnership network help us to conduct our goods anywhere in the planet with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as stay in control.
To get some advice or make a request, contact us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 1 |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1100 l/min |
Flow conductance C | 4,3 l/(s*bar) |
Protection class with connection | IP67 |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Green |
Duty cycle | 100 % |
Typ. switch-on time | 14 ms |
Typ. switch-off time | 22 ms |
Mounting screw | with hexagon socket |
Mounting screw tightening torque | 2 Nm |
Weight | 0,22 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |