We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5796575280
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 6x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5796575280, connect FAMAGA, the world's prime supplier of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are outlined in the quality of outputs and private attention to each purchaser. We praise everyone, who cooperated with us - hence, our regular consumers get the most beneficial purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such consumers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Burkina Faso, Swaziland, Albania, Sri Lanka, Guyana, Eswatini, Iceland, Netherlands, Peru, United States, Sweden, Bhutan, Zimbabwe, United Arab Emirates, Slovakia, Uzbekistan, Jordan, Seychelles, Turkey, Suriname, Luxembourg, Fiji, Togo, Pakistan, Cape Verde, Afghanistan, Georgia, Ecuador, Nigeria, Latvia, Moldova, Indonesia, Laos, Mauritius, Yemen, Sierra Leone, Mauritania, Mexico, Vietnam, Angola, North Korea, Botswana, Tajikistan. A well-built logistics connection and a partnership network allow us to dispatch our goods anywhere in the planet on-time without discrediting product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To inquire or order, get in touch with us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 520 l/min |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |