We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009210
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14000 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412009210, reach FAMAGA, the world's key producer of factory-made equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of spare parts and personalseparate attention to each consumer. We admire everyone, who worked with us - hence, our regular purchasers obtain the most flexible purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Madagascar, Uzbekistan, Monaco, Iceland, Chad, Bangladesh, Saudi Arabia, Palestine, Ireland, Yemen, Kiribati, Czech Republic, Chile, Nigeria, Denmark, Sudan, Bhutan, Equatorial Guinea, Albania, Niger, Cyprus, Namibia, Bolivia, Libya, Egypt, Bosnia and Herzegovina, Mauritius, Armenia, Ukraine, Ghana, Rwanda, Sierra Leone, Turkey, Azerbaijan, Austria, Senegal, Norway, Tunisia, Cape Verde, Uganda, Kuwait, Jordan, Burkina Faso, Lithuania, Brazil, New Zealand, Mali. A well-shaped logistics bond and a partnership network assist us to ship our items anywhere in the globe quickly without discrediting product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 14000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |