We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5792520210
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 12 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5792520210, communicate with FAMAGA, the world's major retailer of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and special attention to each customer. We appreciate everyone, who collaborated with us - therefore, our regular clients procure the most acceptable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4500 such consumers, and we constantly compose new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Egypt, Australia, Swaziland, Lithuania, Cuba, Angola, Portugal, Cameroon, Poland, Bulgaria, Saudi Arabia, Nepal, Malawi, Libya, Colombia, Namibia, Kyrgyzstan, Burundi, United Arab Emirates, Nigeria, Kiribati, Mauritius, Gambia, Indonesia, Liberia, Suriname, Tonga, Jordan, Moldova, Bosnia and Herzegovina, Iceland, Togo, Paraguay, Pakistan, Slovakia, El Salvador, Sudan, Andorra, Senegal, Kazakhstan, Algeria, Niger, Laos, Ireland, Uruguay, United States. A well-built logistics chains and a partnership network guide us to conduct our elements anywhere in the earth quickly without disreputing product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is rising every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To consult or make a request, call us by phone or send a message to the online chat on our site. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 520 l/min |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |