We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011157
Description
Standardization | NAMUR |
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Die cast zinc,Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Number of wires | 3-pin |
Port size | EN 175301-803, form A |
Type | Plug |
Qn 1▶2 | 1070 l/min |
Qn 2▶3 | 950 l/min |
Nominal flow Qn | 900 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | Namur base plate |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412011157, communicate with FAMAGA, the world's primary supplier of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and personalseparate attention to each client. We cherish everyone, who conspired with us - so, our regular clients receive the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Equatorial Guinea, Oman, Honduras, Nepal, Mali, Jamaica, Italy, Ireland, Dominican Republic, Singapore, Djibouti, Togo, Canada, Denmark, Sweden, Guyana, Guinea, Pakistan, Rwanda, Indonesia, Afghanistan, Estonia, South Sudan, Mauritania, Botswana, Syria, Macedonia, Brunei, Paraguay, Russia, Croatia, New Zealand, Costa Rica, Greece, Belarus, Cyprus, Malta, Peru, Mauritius, Swaziland, Bangladesh, Cape Verde, Uganda. A advanced logistics connection and a partnership network guide us to send our elements anywhere in the planet quickly without undermining product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as to stay on the top.
To consult or order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Standards | NAMUR |
Working pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 900 l/min |
Nominal flow 1 ▶ 2 | See table |
Nominal flow 2 ▶ 3 | See table |
Compressed air connection | according to ISO 228-1 |
Pilot control exhaust | with directional pilot air exhaust |
Connector standard | EN 175301-803:2006 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | 13 14 |
Duty cycle | 100 % |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Die cast zinc Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |