We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472407872
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 300 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7472407872, connect FAMAGA, the world's principle supplier of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are symbolized in the quality of goods and special attention to each buyer. We value everyone, who cooperated with us - so, our regular purchasers get the most attractive purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Algeria, Mauritania, Yemen, Uruguay, Pakistan, Singapore, Tanzania, Cameroon, Kuwait, Chad, Zimbabwe, Zambia, Austria, Russia, Israel, Ireland, Haiti, Laos, Iceland, New Zealand, Senegal, Malta, Bosnia and Herzegovina, Kenya, Iraq, Jordan, Hungary, Namibia, Madagascar, Nigeria, Kiribati, Chile, Tonga, Sierra Leone, Qatar, Niger, Cyprus. A well-elaborated logistics chains and a partnership network assist us to dispatch our elements anywhere in the globe on-time without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or book, phone us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |