We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010752
Description
| Piston rod modification | non-rotating |
| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 40 mm |
| Stroke | 15 mm |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 0822010752, contact FAMAGA, the world's top vendor of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of products and special attention to each purchaser. We cherish everyone, who liased with us - therefore, our regular clients bring in the most acceptable purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4000 such clients, and we constantly arrange new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Dominican Republic, Fiji, Spain, Zimbabwe, Gambia, Malawi, Nicaragua, Malta, Netherlands, Sweden, Togo, Czech Republic, Niger, Ecuador, Australia, Liechtenstein, Uzbekistan, Pakistan, Chad, Mauritius, Armenia, Kiribati, Iran, Turkey, Eswatini, Croatia, Slovakia, Peru, Paraguay, Serbia, Argentina, Bosnia and Herzegovina, Uganda, Tonga, Senegal, Ghana, Sierra Leone, Hungary, Mali, Burkina Faso, Algeria, South Korea. A well-shaped logistics series and a partnership network guide us to send our elements anywhere in the earth on-time without damaging product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -25 ... 80 °C |
| Medium temperature min./max. | -25 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Other versions can be ordered from AVENTICS sales offices. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Piston | Nitrile rubber |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Scraper | Polyurethane |
