We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020716
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412020716, get in touch with FAMAGA, the world's top supplier of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of goods and particular attention to each orderer. We esteem everyone, who cooperated with us - thus, our regular consumers get the most favorable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Panama, Croatia, Dominican Republic, Norway, Peru, Tonga, Singapore, Papua New Guinea, Niger, Syria, Swaziland, Antigua and Barbuda, Switzerland, United Arab Emirates, Eritrea, Kazakhstan, Netherlands, Qatar, Georgia, Burkina Faso, Mauritania, Fiji, Turkmenistan, Botswana, Laos, Kuwait, Czech Republic, Mauritius, Kyrgyzstan, Indonesia, Kenya, Malaysia, Finland, El Salvador, Zimbabwe, Morocco, Latvia, New Zealand, Togo, Uruguay. A well-shaped logistics network and a partnership network assist us to dispatch our items anywhere in the globe quickly without undermining product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or make a request, contact us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |