We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020703
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412020703, reach FAMAGA, the world's dominant distributor of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each consumer. We respect everyone, who conspired with us - so, our regular buyers accept the most favorable purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Gabon, Kenya, Chile, Monaco, Poland, Kazakhstan, Sweden, Libya, Oman, United Arab Emirates, Colombia, Denmark, Angola, Uzbekistan, Thailand, Tajikistan, Zimbabwe, United States, Mexico, Madagascar, Belarus, Japan, Haiti, Peru, Mongolia, Bangladesh, Luxembourg, Indonesia, South Korea, East Timor, Mozambique, Yemen, China, Vietnam, Brazil, Qatar, Malaysia, Pakistan, The Gambia, Mauritius, North Korea, Egypt, Tanzania. A advanced logistics series and a partnership network cheer us to send our goods anywhere in the world with no delay without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as stay in control.
To consult or make a request, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |