We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822084208
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822084208, contact FAMAGA, the world's influential retailer of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each customer. We appreciate everyone, who joined with us - thus, our regular consumers obtain the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cape Verde, Luxembourg, Dominican Republic, Bhutan, Russia, Guinea, Egypt, Swaziland, Armenia, Madagascar, Ghana, China, Latvia, Afghanistan, Denmark, Malaysia, Vietnam, Georgia, Mauritania, The Bahamas, Uzbekistan, Ireland, Brazil, Nicaragua, Bosnia and Herzegovina, Albania, Togo, South Korea, Estonia, United States, El Salvador, Zimbabwe, Macedonia, Mauritius, Sudan, Bolivia, Uruguay, Yemen, Costa Rica, Finland, Cameroon. A well-elaborated logistics bond and a partnership network allow us to send our units anywhere in the world as soon as possible without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |