We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
1332008000 (ICM-DA-020-0080-M) AVENTICS - Minizylinder, Serie ICM
Part number
1332008000
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1332008000 (ICM-DA-020-0080-M) AVENTICS - Minizylinder, Serie ICM 1332008000, connect FAMAGA, the world's major company of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of products and private attention to each user. We understand everyone, who liased with us - hence, our regular consumers accept the most convenient purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Bosnia and Herzegovina, The Bahamas, Guyana, San Marino, Mongolia, Thailand, United States, Bhutan, Cyprus, Tonga, Guatemala, Slovenia, Cameroon, Russia, Belize, Sweden, Angola, New Zealand, Japan, Burkina Faso, Belarus, Eritrea, Netherlands, Israel, Kuwait, Niger, Syria, Croatia, Seychelles, Malaysia, Andorra, Latvia, Austria, Jamaica, Fiji, Georgia, Bolivia, Australia, Yemen, Tunisia, Brunei, Senegal, Philippines, Montenegro, Comoros, Suriname, Estonia, Zimbabwe. A well-elaborated logistics network and a partnership network assist us to deliver our units anywhere in the globe quickly without disreputing product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To get some advice or book, get in touch with us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |