We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637955
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Standardization | ISO 15524 |
Stroke | 50 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480637955, communicate with FAMAGA, the world's main supplier of industrialized equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each orderer. We cherish everyone, who joined with us - hence, our regular buyers get the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Chad, Hungary, Sudan, Equatorial Guinea, Liechtenstein, Nepal, Guinea, South Sudan, Eswatini, Russia, Burkina Faso, Bosnia and Herzegovina, Palestine, Honduras, Burma, Uganda, South Korea, Uruguay, Central African Republic, Lithuania, Czech Republic, Azerbaijan, Nicaragua, Niger, Mauritania, Burundi, Kyrgyzstan, Rwanda, Belize, Iraq, Macedonia, El Salvador, Tanzania, Thailand, Antigua and Barbuda, Senegal, Malta, Bulgaria, Austria, Dominica, Mongolia, Tunisia. A well-built logistics bond and a partnership network guide us to dispatch our products anywhere in the earth immediately without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To consult or book, contact us or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |