We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637881
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 50 mm |
| Piston rod thread | M10 |
| Standardization | ISO 15524 |
| Stroke | 80 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Polyurethane |
| Compressed air connection | G 1/4 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Aventics (brand of Emerson) R480637881, catch up with FAMAGA, the world's foremost company of industrialized equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of products and private attention to each orderer. We esteem everyone, who engaged with us - therefore, our regular consumers get the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Guyana, Mozambique, Zimbabwe, Tajikistan, El Salvador, Central African Republic, Eritrea, Jordan, Bolivia, Antigua and Barbuda, Czech Republic, Honduras, Grenada, Romania, Canada, Costa Rica, Libya, East Timor, Mauritius, Benin, Afghanistan, Angola, Belize, Burkina Faso, Rwanda, Jamaica, Mexico, Comoros, Georgia, Liechtenstein, Estonia, Tunisia, Togo, Suriname, Croatia, Nepal, Cyprus, Kuwait, Indonesia, Equatorial Guinea, Samoa, Malaysia. A well-shaped logistics bond and a partnership network let us to ship our products anywhere in the world promptly without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note the selection of fittings for strokes < 10 mm . |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
