We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5894420620
Description
Return type | With spring return |
Switching principle | 3/2 |
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5894420620, contact FAMAGA, the world's key retailer of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of outputs and personalseparate attention to each consumer. We appreciate everyone, who cooperated with us - thus, our regular consumers accept the most acceptable purchase terms and discounts on the industrial equipment market. Today, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Brazil, Colombia, North Korea, Grenada, Israel, Sri Lanka, Tunisia, Greece, Poland, Iran, Mozambique, Gambia, Liechtenstein, Finland, Lithuania, South Sudan, Belize, China, Armenia, Eritrea, Cameroon, Norway, Philippines, Rwanda, Burkina Faso, Burundi, Antigua and Barbuda, Libya, Andorra, Qatar, Czech Republic, Egypt, Uganda, Seychelles, Australia, Iceland, Austria, Mongolia, Montenegro, Albania, Nigeria, Slovakia, Sierra Leone, Kazakhstan. A well-developed logistics system and a partnership network allow us to dispatch our items anywhere in the earth on-time without undermining product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is growing every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as stay in control.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. Working pressure with vacuum operation, connection 1: min. 3 bar , connection 3: min. - 0.95 bar The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |