We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402001236
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 250 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R402001236, make contact with FAMAGA, the world's main producer of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each purchaser. We respect everyone, who collaborated with us - thus, our regular clients obtain the most favorable purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Comoros, Gambia, Djibouti, Indonesia, Slovenia, Guinea, Switzerland, Burkina Faso, Senegal, Haiti, Turkey, Georgia, Croatia, Chile, Belarus, Tonga, The Bahamas, Cyprus, Guyana, Mali, Benin, Belize, Bolivia, Azerbaijan, Peru, Ukraine, Brunei, Montenegro, Vietnam, Kuwait, Cape Verde, India, Swaziland, Austria, South Sudan, Thailand, Zimbabwe, Ireland, Morocco, Guatemala, Dominica, Slovakia, United States, Afghanistan, Panama, Suriname. A well-built logistics chains and a partnership network let us to conduct our units anywhere in the world as soon as possible without damaging product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of machine made streamlined equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or book, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |