We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394003
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822394003, catch up with FAMAGA, the world's influential provider of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are illustrated in the quality of outcomes and personalseparate attention to each buyer. We esteem everyone, who collaborated with us - therefore, our regular clients obtain the most desirable purchase forms and discounts on the factory-made equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Ghana, Fiji, Nigeria, Thailand, Guinea, Eritrea, Kiribati, Czech Republic, Nepal, Congo, Morocco, North Korea, Denmark, Poland, Kyrgyzstan, United Arab Emirates, Azerbaijan, Norway, Ireland, Niger, Georgia, India, Angola, Greece, Cape Verde, Iran, Swaziland, Macedonia, Uruguay, Mongolia, Serbia, New Zealand, Indonesia, Jordan, Suriname, Ecuador, Chile, Uganda, Hungary, Equatorial Guinea, South Korea, Slovakia, Bulgaria, Kenya, Bangladesh. A well-shaped logistics system and a partnership network cheer us to deliver our goods anywhere in the planet on-time without damaging product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are happy that customers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |