We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472408208
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472408208, connect FAMAGA, the world's leading company of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of outputs and particular attention to each client. We understand everyone, who worked with us - thus, our regular consumers obtain the most acceptable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Algeria, The Bahamas, San Marino, Laos, New Zealand, Liberia, Ukraine, Benin, Mexico, Ireland, India, Bhutan, Kiribati, Japan, Luxembourg, Serbia, Guyana, Haiti, Ecuador, China, Estonia, Netherlands, Croatia, Eritrea, Qatar, Seychelles, Philippines, Tonga, Indonesia, Turkey, Brunei, Comoros, Fiji, Swaziland, Zimbabwe, Guatemala, Uruguay, Burkina Faso, Mauritius, South Korea, Mauritania, Senegal, Togo, Equatorial Guinea. A well-shaped logistics bond and a partnership network guide us to dispatch our goods anywhere in the earth on-time without disreputing product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |