We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480647341
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480647341, catch up with FAMAGA, the world's major distributor of manufacturing equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of products and individual attention to each consumer. We esteem everyone, who liased with us - hence, our regular clients bring in the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Djibouti, Fiji, Montenegro, Slovenia, Oman, Ukraine, Rwanda, Nepal, Cuba, Suriname, Libya, Denmark, Czech Republic, Bolivia, Afghanistan, Latvia, Philippines, Iceland, Malaysia, Seychelles, Mexico, Switzerland, Benin, Vietnam, Ireland, Netherlands, Tajikistan, Botswana, Moldova, South Sudan, Angola, Turkmenistan, Estonia, Cameroon, Sweden, United Arab Emirates, Mauritius, China, Costa Rica, Syria, Qatar, Poland, Luxembourg. A well-developed logistics link and a partnership network allow us to deliver our goods anywhere in the world with no delay without undermining product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |