We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480668808
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480668808, connect FAMAGA, the world's key producer of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of goods and private attention to each consumer. We understand everyone, who worked with us - thus, our regular customers obtain the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Romania, Costa Rica, Seychelles, Samoa, United States, Sudan, The Bahamas, Andorra, Peru, El Salvador, South Sudan, New Zealand, Angola, East Timor, Malta, Croatia, Yemen, Oman, Kuwait, North Korea, Cyprus, Syria, Fiji, Dominica, Malaysia, Burundi, Mauritania, Russia, The Gambia, Comoros, United Arab Emirates, Tanzania, Latvia, Kyrgyzstan, Tajikistan, Senegal, Slovakia, Guatemala, Sweden, Belarus, Rwanda, Haiti, Czech Republic, South Korea, Nepal, Estonia, Antigua and Barbuda. A well-built logistics bond and a partnership network allow us to dispatch our items anywhere in the globe as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyurethane |