We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503370
Description
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
Type | Manifold subbase |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1825503370, call FAMAGA, the world's main vendor of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and personalseparate attention to each purchaser. We esteem everyone, who liased with us - hence, our regular customers get the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, Macedonia, Gambia, Nicaragua, Lesotho, New Zealand, Bangladesh, Burkina Faso, Thailand, Mali, Lithuania, Namibia, Egypt, Slovakia, Kenya, Mauritania, Israel, Qatar, Chile, Botswana, Iraq, Greece, Argentina, Angola, Kyrgyzstan, Mozambique, Antigua and Barbuda, Azerbaijan, Mongolia, Tonga, Iceland, Haiti, Equatorial Guinea, Sierra Leone, Burundi, Zambia, Tunisia, Jordan, Djibouti, Bulgaria, United States. A well-elaborated logistics link and a partnership network cheer us to deliver our units anywhere in the earth with no delay without discrediting product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is growing every day. We are happy that users choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as stay in control.
To inquire or order, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | 50 °C |
Medium | Compressed air |
Grid dimension | 34 mm |
Direction of pneumatic port (2,4) | On the side |
Mounting screw | with hexagon socket |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |